RC Boats Parts and accessories
Description:Water Coling Brass Nipple Nozzle provide a simple and secure way to connect tubing for fluid transfer applications. They are designed with a simple barb or ridge on, one end it is for the Tubing and the other end it is for a Threaded connectionUsage:For RC-Boats, WaterColing Devices,..
2.48€
Ex Tax:2.00€Description:Water Coling Brass Nipple Nozzle provide a simple and secure way to connect tubing for fluid transfer applications. They are designed with a simple barb or ridge on, one end it is for the Tubing and the other end it is for a Threaded connectionUsage:For RC-Boats, WaterColing Devices,..
2.48€
Ex Tax:2.00€Description:Water Coling Brass Nipple Nozzle provide a simple and secure way to connect tubing for fluid transfer applications. They are designed with a simple barb or ridge on, one end it is for the Tubing and the other end it is for a Threaded connectionUsage:For RC-Boats, WaterColing Devices,..
2.48€
Ex Tax:2.00€Description:Water Coling Brass Nipple Nozzle provide a simple and secure way to connect tubing for fluid transfer applications. They are designed with a simple barb or ridge on, one end it is for the Tubing and the other end it is for a Threaded connectionUsage:For RC-Boats, WaterColing Devices,..
2.48€
Ex Tax:2.00€Description:Water Coling Brass Nipple Nozzle provide a simple and secure way to connect tubing for fluid transfer applications. They are designed with a simple barb or ridge on, one end it is for the Tubing and the other end it is for a Threaded connectionUsage:For RC-Boats, WaterColing Devices,..
2.48€
Ex Tax:2.00€CNC Aluminum Water-Cooled Motor Mount – High-Performance 6066 AlloyEngineered for Maximum Torque and Efficiency. This precision mount is specifically designed to unlock the full potential of Brushless Outrunner Motors. While traditional Inrunners often suffer from high heat and "energy-killing" inef..
19.84€
Ex Tax:16.00€Propeller Drive Dog for Φ3.0mm Shaft. High quality drive dogs for RC boats drive shaft. The propeller drive dog made from aluminium, brass or Steel alloy with grub steel screw fixing. Usage:Use it for Electrric RC Boat with 3.0mm Propeller ShaftSpecifications:Material: BrassSize: Φ7.0mm Length: ..
3.72€
Ex Tax:3.00€Propeller Drive Dog for Φ4.76mm Shaft. High quality drive dogs for RC boats drive shaft. The propeller drive dog made from aluminium, brass or Steel alloy with grub steel screw fixing.
Usage:Use it for Electrric RC Boat with 3/16 inches, 4.76mm ShaftSpecifications:Material: SteelSize: Φ10.0mm L..
4.65€
Ex Tax:3.75€Propeller Drive Dog for Φ4.0mm Shaft. High quality drive dogs for RC boats drive shaft. The propeller drive dog made from aluminium, brass or Steel alloy with grub steel screw fixing. Usage:Use it for Electrric RC Boat with 4.0mm Propeller ShaftSpecifications:Material: BrassSize: Φ8.0mm Length: ..
3.72€
Ex Tax:3.00€Propeller Drive Dog for Φ6.35mm Shaft. High quality drive dogs for RC boats drive shaft. The propeller drive dog made from aluminium, brass or Steel alloy with grub steel screw fixing.
Usage:Use it for Electrric RC Boat with 1/4 inches, 6.35mm ShaftSpecifications:Material: SteelSize: Φ13.5mm Le..
4.96€
Ex Tax:4.00€Protect the GPS Module Preventing Electromagnetic Interference. Decreases any interferences from electrical components (Brushless Motors, ESCs, UBEC, etc.. Protection of the GPS Module. Specifications:- CNC manufacturing- Material: Aluminum Alloy
- Anodized Color: Red, Black, Blue, Silver
- Hei..
7.44€
Ex Tax:6.00€This CNCed Realize Part made by Aluminum Alloy and have high stress area.
We suggest using them on anywhere you need a better hardware. Very convenient for RC-Boats and UAVs projects.
Features: - Material Aluminium Alloy- Extra Hole with φ3mm in the center of main plate for Dual Realizes..
13.95€
Ex Tax:11.25€Silicone Tube Heat Resistant for RC Boat Cooling System
(We don't cut the Silicone Tube, if you will order above 1 meter, you will receive a continuous Silicone Tube).
Usage: Suitable for RC-Bots, Industry, Agriculture, Fishery, Household, Watering, Car washing, Land washing and other convention..
3.72€
Ex Tax:3.00€Silicone Tube Heat Resistant for RC Boat Cooling System
(We don't cut the Silicone Tube, if you will order above 1 meter, you will receive a continuous Silicone Tube).
Usage: Suitable for RC-Bots, Industry, Agriculture, Fishery, Household, Watering, Car washing, Land washing and other convention..
4.34€
Ex Tax:3.50€Teflon (PTFE) or Polytetrafluoroethylene Washers is circular shape and a hole in the center, it is flat with thickness 2.0mm.Features:High Strength
Durability
Low Friction
Non-StickUsage:
in RC-Boats Shafts, Pressure Gage, etc.What you Get:2 x Teflon Washers 10mm diameter, 4.76mm hol..
2.48€
Ex Tax:2.00€Micro Coreless Motor Ultra High Speed for RC Models, Ronbits, DIY projectsFeatures:Rated voltage 3.2V DC Direction of rotation CW and CCW Operatin..
8.68€
Ex Tax:7.00€Steel Washer A2 DIN-125 M5 for Bolts and ScrewsWhat you Get:1 x Washer M5 xD9.7xT1mm..
0.31€
Ex Tax:0.25€DJI Plastic Propellers (normal and reverse) rotation for MultiRotors flyers eg. Phantom 1. etc.The Propeller Hub is DJI style and fit to DJI Motors 22..
4.00€
Ex Tax:3.23€Gryphon Glow plug wire Alligator Clip..
5.40€
Ex Tax:4.35€Gemfan 4045 Bullnose (BN) 3Blade 2L2R PC Unbreakable Propellers. Optimal Product Quality. One of the Most Used Propeller for 110,130 up to 170 sized r..
2.70€
Ex Tax:2.18€FlySky X6B Receiver, 2.4GHz 6 channels i-BUS PortProduct Information:Compatible with FlySky Transmitters: FS-i4X, FS-i6X, FS-i10, FS-i4, FS-i6S, FS-i6..
28.52€
Ex Tax:23.00€Overview:Expand your ESP32 prototyping capability with this 38-Pin GPIO Breakout Expansion Board. Designed as a header-pin breakout shield for ESP32 D..
5.89€
Ex Tax:4.75€Specifications:Pitch 2.54mmGender of Connector: MaleNumber of Pins: 40PinType of Row: Single-RowType of connector: Straight What you Get:1 x 40Pi..
0.49€
Ex Tax:0.40€Overview:Simplify your IoT, home automation, and robotics wiring with this 38-Pin Expansion Board for ESP32 development boards. Designed to solve the ..
4.96€
Ex Tax:4.00€Professional Grade performance with Military-Grade durabilityProfessional Grade Vibration Isolation for Flight Controllers & Sensors Ensure peak p..
4.03€
Ex Tax:3.25€2.4GHz Receiver Antenna, IPEX1 or IPEX4 Micro Connector Port, 150mm. Used on FrSky 2.4G receiver, Futaba 2.4G receiver, etc..Specifications:Conne..
3.72€
Ex Tax:3.00€What you Get:1 x FlyWing FV315 Tail Blade for UH-1, Bell-206 scale helicopters..
7.44€
Ex Tax:6.00€Introduction:Radiolink AT10 v2 12Channels 2.4GHz Radio System with 12CH Receiver with Dual Antennas (Long Range) and the Telemetry Module RPM-01This s..
179.80€
Ex Tax:145.00€These Deans (T-Plug) connectors made from the highest quality materials to ensure you get the best connection. These connectors designed for RC applic..
0.77€
Ex Tax:0.62€This antenna cable is suitable for wireless Devices such us:
- 802.11N, AC, G, A, B. - 900MHz- 2.4GHz
- 5GHz
- Any other frequency between 0 - 18G..
6.20€
Ex Tax:5.00€Folding Antenna Mount Holder for GPS
Sturdy build with the ability to fold into a lowered position. Fits most multi-rotors using 2 screw points...
4.96€
Ex Tax:4.00€Introduction:This module is a nice little relay switch controlled by a spare auxiliary channel on your receiver. Ideal for switching lights, sound, ..
9.92€
Ex Tax:8.00€Overview:Upgrade your Arduino Nano V3.0 project from fragile breadboard jumper wires to rock-solid industrial connections with the Nano V3.0 Expansion..
4.96€
Ex Tax:4.00€Adjustable Step Down Voltage Regulator, Input Voltage Range from 4.0~40V (input voltage must be higher than output voltage at least 1.5V). Continuousl..
4.96€
Ex Tax:4.00€GWS Power Divider 1.Be sure to observe the correct polarity when connecting receiver and servos to the PD-2.2.Be aware of voltage drop when using lon..
18.60€
Ex Tax:15.00€DJI Plastic Propellers (normal and reverse) rotation for MultiRotors flyers eg. Phantom 1. etc.The Propeller Hub is DJI style and fit to DJI Motors 22..
4.00€
Ex Tax:3.23€Product DescriptionScorpion lock strap has the revolutionary change for the traditional strap, with the newest design of non-slippery grip to assure m..
6.20€
Ex Tax:5.00€Flight Control Mounting Plate set for OMPhobby M2 EVO RC HelicopterWhat you Get:1 x Flight Control Mounting Plate4 x Screw M1.7x4mm 2 x Screw M1...
4.99€
Ex Tax:4.02€Arduino & Rasberry PI GSM/GPRS/SMS/DTMF Shield It is equipped with primary and secondary SIM holderFully integrated, functional and aff..
68.57€
Ex Tax:55.30€05019 Chassis, LOGO 700, Mikado helicopters, spareparts, Tail boom distance spacer..
12.90€
Ex Tax:10.40€Thust Ball Bearing for all rc models (helicopters, Robot-cars, etc..)Features:Type: Thrust Ball BearingMaterial: Chrome SteelSize: 1cm x 1.9cm x 0.5cm..
4.40€
Ex Tax:3.55€HQProp Thin Electric Prop is a 2-blade Composite (Fiberglass Reinforced with Nylon). High Performance Prop for Racing Quads. For Multicopters ap..
3.10€
Ex Tax:2.50€04713 Mikado helicopters spareparts Tail boom holder, LOGO 550 SX..
9.90€
Ex Tax:7.98€02314 Mikado spareparts LOGO 480 Blade holder 12 mm blade grip, incl. screws..
10.39€
Ex Tax:8.38€Aluminum GT2 Timing Belt Pulley 20T Bore 8mm Pitch 2mm for 6mm BeltDiscription:A Timing pulley is a wheel on an axle or shaft that is designed to supp..
2.30€
Ex Tax:1.85€Graupner 12x7" G-Sonic (Nitro-Gas) Propeller
Introduction:These propellers have been developed to incorporate the latest scientific findings, and are..
10.73€
Ex Tax:8.65€Hobbywing UBEC 3A @ 5/6V with Noise Filter and Ferrite bead for RF Features:Uses an advanced switch mode DC-DC regulator IC.
Output is power..
8.97€
Ex Tax:7.24€05103 Mikado helicopters Carbon vertical fin with ball bearing, LOGO 600..
26.90€
Ex Tax:21.69€Servo Y-Harness Extension Twisted cable 22AWG, length 30cm, with JR type connectorsApplications:- Use to work 2 servos with one channel, (parall..
2.79€
Ex Tax:2.25€04553 Mikado helicopters spareparts Alu-Screw Seat For Socket Head Screws 3mm , LOGO XXtreme..
7.90€
Ex Tax:6.37€Description:Covers all gauges of wires you'll need in RC hobbies and many other applications. Shrink Heat Tube combo set contains sizes from 1.5mm up ..
12.40€
Ex Tax:10.00€Aluminium Bullet Propeller Adapter Collet type for 2,3, 3.17, 4, 5, 6, 8mm Motor Axle.Suitable for Brushless Motors or Brushed with Motor Shaft 2,3/3...
2.48€
Ex Tax:2.00€02383 Mikado helicopters spareparts Swashplate guide bracket..
4.90€
Ex Tax:3.95€The MKS Battery Balancer/Discharger is designed for Li-Polymer and Li-Fe battery, it can execute balance work for series batteries, or for battery dis..
24.70€
Ex Tax:19.92€Universal Aluminum Folding GPS Antenna base, for Dji & Others.Aluminium Alloy CNC ManufacturingUniversal Type Folding mechanismWhat you ..
7.44€
Ex Tax:6.00€Introduction:Button Socket cap head screw have large cylindrical head with recessed hex-shaped drives. They have metric thread (25.4mm equal to 1 inch..
1.61€
Ex Tax:1.30€04139 Mikado helicopters Rudder control guide for 25mm tailboom..
4.90€
Ex Tax:3.95€DJI Zenmuse Z15-5D Camera Gimbal For or Canon EOS 5D MARK II and MARK IIIIntoduction:The DJI Zenmuse Z15-5D Gimbal, based on the technology of the Zen..
2,368.40€
Ex Tax:1,910.00€Two Blade Racing Propeller P series, Right direction, M4 thread shaft, for rc Boat ModelsSpecifications:- Two Blade Propeller.- Diameter : Ø 37.5m..
8.99€
Ex Tax:7.25€Micro Coreless Motor..
8.68€
Ex Tax:7.00€DJI Plastic Propelle..
4.00€
Ex Tax:3.23€Gryphon Glow plug wi..
5.40€
Ex Tax:4.35€Gemfan 4045 Bullnose..
2.70€
Ex Tax:2.18€FlySky X6B Receiver,..
28.52€
Ex Tax:23.00€Overview:Expand your..
5.89€
Ex Tax:4.75€Specifications:Pitch..
0.49€
Ex Tax:0.40€Overview:Simplify yo..
4.96€
Ex Tax:4.00€Professional Grade p..
4.03€
Ex Tax:3.25€2.4GHz Receiver Ante..
3.72€
Ex Tax:3.00€What you Get:1 x Fly..
7.44€
Ex Tax:6.00€














































