Flat Bar made from carbon fiber
materials (Carbon Fiber with Epoxy resin). It is real carbon fiber mixed
with epoxy resin and pultruded.
With constant thickness, Great
Straightness, very high Hardness, very Low weight, being an ideal
material for the construction of frames, trusses and for its use as
reinforcement material.
The flat Bars are easy to work with. They
can be cut with a band saw, jigsaw, radial, milling cutter, or Dremmel.
They are also simply sanded.
Introduction:Carbon Fiber Flat Bar, Strips, made from Carbon Fiber and Resin Epoxy. Manufactured with Pultrusion method. Since these flat bars/strips are made of 100% carbon fiber, with a very constant thickness and very little weight, they are perfect for precision or structural work.With constan..
3.35€
Ex Tax:2.70€
Introduction:Carbon Fiber Flat Bar, made from Carbon Fiber and Resin Epoxy. Manufactured from Pultrusion. Since these flat bars/strips are made of 100% carbon fiber, with a very constant thickness and very little weight, they are perfect for precision or structural work.With constant thickness, gr..
4.34€
Ex Tax:3.50€
Introduction:Carbon Fiber Flat Bar, made from Carbon Fiber and Resin Epoxy. Manufactured from Pultrusion. Since these flat bars/strips are made of 100% carbon fiber, with a very constant thickness and very little weight, they are perfect for precision or structural work.With constant thickness, gr..
4.34€
Ex Tax:3.50€
Introduction:Carbon Fiber Flat Bar, made from Carbon Fiber and Resin Epoxy. Manufactured from Pultrusion. Since these flat bars/strips are made of 100% carbon fiber, with a very constant thickness and very little weight, they are perfect for precision or structural work.With constant thickness, gr..
4.96€
Ex Tax:4.00€
Introduction:Carbon Fiber Flat Bar, made from Carbon Fiber and Resin Epoxy. Manufactured from Pultrusion. Since these flat bars/strips are made of 100% carbon fiber, with a very constant thickness and very little weight, they are perfect for precision or structural work.With constant thickness, gr..
5.58€
Ex Tax:4.50€Showing 1 to 5 of 5 (1 Pages)
04280 Mikado helicopters spareparts, Front canopy support set LOGO 500, LOGO 550 SE, LOGO 550 SX -04280..
4.90€
Ex Tax:3.95€
04977 This wire connects a VBar Control Satellite to a VBar NEO (without built-in VLink-Receiver)...
8.90€
Ex Tax:7.18€
Satellite Receiver adapter for Futaba, Frsky, Radiomaster, Jumper. Receivers using SBUS serial protocol.Usage:For OMPHOBBY M1, M1EVO, M2 2019, M2V..
2.99€
Ex Tax:2.41€
04073 Mikado Helicopters Spare Parts Carbon control rod for tail LOGO 600..
11.90€
Ex Tax:9.60€
Features:
These propellers are made from BeechwoodSmooth Running with Low Vibration Levels.Ultra-Quiet, High efficiency due to special blade shape an..
27.28€
Ex Tax:22.00€
Fiberglass Float Set with Ruder for R/C Airplanes 40 sizeIntroduction:Float set with Rudder you can convert any RC Model Airplane into to a nice Hydro..
79.36€
Ex Tax:64.00€
Product No: TAA4504S75XT3 - Article No: TA-75C-450-4S1PTattu 450mAh 4S 75C Lipo battery is a high quality and high discharge rate Lipo battery, ..
18.97€
Ex Tax:15.30€
What you Get:1 x Fly Wing FV321-Landing Skid white for FW450L-V3 helicopter..
6.20€
Ex Tax:5.00€
Description:Heat Shrinkable Tubing. Cable Wire Heatshrink Tubing Wrap. We don't cut the wire if you will order above 1meter Features:General purp..
0.87€
Ex Tax:0.70€
NEMesis Motor Arms Fit to CNCed NEMesis Chassis. Made by CNC Router from 3K Carbon Fiber Sheet.It Can Accept Brushless Motor 22x, 23x, 24x, 25x, up 30..
21.08€
Ex Tax:17.00€
Serial Adaptor XT60. Connect two Batteries in Series, Double the Voltage OutputSpecifications:Plugs: One female XT60 and Two male XT60Connectors M..
9.30€
Ex Tax:7.50€
05064 VBar Accessories Antenna for VBar NEO, 250mm..
8.90€
Ex Tax:7.18€
04212 Mikado helicopters Pinion for herringbone gear 12 teeth, M0.7..
19.90€
Ex Tax:16.05€
Micro Coreless Motor Ultra High Speed for RC Models, Ronbits, DIY projectsFeatures:Rated voltage 3.2V DC Direction of rotation CW and CCW Operatin..
8.68€
Ex Tax:7.00€
DJI BTU Module (bluetooth) for Naza-M V2 controllerOverview:
The BTU (Bluetooth Module) & Naza-M assistant software now provides an interface for..
39.68€
Ex Tax:32.00€
Hirose DF13 series plugs with 4 or 5 or 6 PIN Position Connector.Usage:For Connection Between the PIXhawk or PIX4 and the GPS Receiver Module
Sp..
1.24€
Ex Tax:1.00€
Everglue Epoxy 30 Minute 2 x 50ml per Bottle Resin and Hardener. Store in a Dry, Cool and Dark place.What you Get: 1 x Everglue 30 minute epoxy 1..
9.92€
Ex Tax:8.00€
With Soft Silcone Cable 22AWG. JST-XH Connectors. Available for Lipo Battery 2s, 3s, 4s, 5s and 6s. What you Get:1 x Silcone Balance Extension Cable w..
3.50€
Ex Tax:2.82€
04521 Mikado Helicopters Chassis Parts Ball bearing 6x13x5mm..
6.20€
Ex Tax:5.00€
Hot
New Product
High-quality round aluminum alloy blind standoffs, designed for lightweight and durable landing gear or structural applications in drones and RC build..
2.48€
Ex Tax:2.00€
Use it for:Fields used in 3d_Printers, DIY CNC, motorcycle, motor, pumps, fan, air conditioner, microwave oven, sweing machine, massage chairs, agricu..
3.29€
Ex Tax:2.65€
Gemfan 11 x 6" Nitro or Gas Engine Propeller
Introduction:GemFan produces some of the finest props for RC use. One of these series are the GP Type (f..
4.34€
Ex Tax:3.50€
Specifications-Driver head made by HSS(High Speed Steel), build for wear and distortion-Professional qualityWeight including packaging12g..
9.92€
Ex Tax:8.00€
Description:Heat Shrinkable Tubing. Cable Wire Heatshrink Tubing Wrap. We don't cut the wire if you will order above 1meter Features:General purp..
8.68€
Ex Tax:7.00€