One Cell Lipo Battery Pack 3.7V
Lipo Battery Pack 220mAh 1S1P. Max Burst Discharge: 45C, It suited to the following model:Micro rc-airplanesMicro r/c helicoptersSmall drones and so on- Charge Rate: 1-3C Recommended, 5C MaxWhat you Get:1 x Brainergy 3.7V 220mAh 45C 1S1P Lipo Battery Pack..
3.90€
Ex Tax:3.15€
Gens ace 300mAh 3.7V 20C 1S1P Lipo Battery Pack with JST Plug
Product no.: BA-20C-300-1S1P
Specifications:
- Product Type:lipo battery pack
- Capacity: 300mAh
- Voltage: 3.7V
- Weight: 10 g
- Dimensions: 47 x 18 x 6mm (L * W * H) - Wire Gauge: No- Wire Length (C/D): No
- Balance Plug: JST
..
6.70€
Ex Tax:5.40€
Gens ace lipo 3500mAh 1S1P lipo battery pack has remarkable stacking technology which enables single-cell capacities of 3500mAh. This battery is specially designed for the Airtronics/Sanwa MT-44 transmitter. Gens ace 3500mAh 3.7V 1S1P Lipo Battery Pack Specs : - Voltage: 3.7V (3s)- Max Continuous Di..
13.64€
Ex Tax:11.00€
MPN: TA-30C-600-1S1P-JST-1Specifications:- Product Type:lipo battery pack- Capacity: 600mAh- Voltage: 3.7V- Max Continuous Discharge: 30C (18A)- Max Burst Discharge: 60C (36A)- Weight:: 15.7g- Dimensions: 58.5 *18.5 *7.7 mm (L * W * H) - Wire Gauge: No- Wire Length (C/D): No- Balance Plug: No- Disch..
7.75€
Ex Tax:6.25€
Product no.: TAA5001S95JCL - Article no: TA-RL-95C-500-1S1P-LTattu R-Line 500mAh 3.7V 95C 1S1P Lipo Battery has full capacity and discharge rate. It is a high discharge rate FPV racing lipo battery. The 95C gives you enough power under load. It is very compact in size and very light in weight...
7.13€
Ex Tax:5.75€Showing 1 to 5 of 5 (1 Pages)
The TX-5D Transmitter can connect direct to your HDMI device and transmitting AV resolution. Powerful with 600mW of ultra clean 5.8GHz . Introduc..
90.77€
Ex Tax:73.20€
Product DescriptionScorpion lock strap has the revolutionary change for the traditional strap, with the newest design of non-slippery grip to assure m..
6.80€
Ex Tax:5.48€
Tattu Funfly Series 1800mAh 14.8V 100C 4S1P Lipo Battery Pack with XT-60 Plug
Product no.: TA-FF-100C-1800-4S1PIntroduction:
Tattu Funfly 1800..
27.90€
Ex Tax:22.50€
The I2C splitter Module with case, used to expand the Pixhawk or compatible flight controllers with DF13 plug for I2C port. The splitter has five DF13..
4.65€
Ex Tax:3.75€
Description:Heat Shrinkable Tubing. Cable Wire Heatshrink Tubing Wrap. We don't cut the wire if you will order above 1meter Features:General purp..
0.87€
Ex Tax:0.70€
NEMesis Motor Arms Fit to CNCed NEMesis Chassis.Specifications:Material: 3K Carbon Fiber Sheet Plain Weave Glossy FinishedMotor to Motor Diagonial: 28..
19.22€
Ex Tax:15.50€
Tape Strap Hinge 20mm -0.5mtr. Highly resistant against UV radiation, weatherproof and is removable without residue. The tape with strong bonding char..
2.90€
Ex Tax:2.34€
Serial Adaptor T-Plug. Connect two Batteries in Series, Double the Voltage OutputSpecifications:Plugs: One female T-Plug and Two male T-PlugConnec..
9.30€
Ex Tax:7.50€
Gemfan Carbon Fiber Propellers are an excellent choice for Multirotors for the maximum performance and provide optimal power.Similar in shape to T-Typ..
27.28€
Ex Tax:22.00€
Product DescriptionGood news to all RC enthusiast, let us introduce to you: Scorpion High Performance Tools.We understand how important it is for RC e..
19.84€
Ex Tax:16.00€
New Product
Arduino Nano Terminal Adapter – Fully Assembled Screw ShieldSave time and avoid soldering mistakes. This terminal expansion board comes 100% pre-assem..
3.10€
Ex Tax:2.50€
MPN: TA-RL-95C-1300-4S1P-SquareSpecifications:- Product Type: Lipo battery pack- Capacity: 1300mAh- Voltage: 14.8V- Max Continuous Discharge: 95C (123..
27.28€
Ex Tax:22.00€
Introduction:To give a bit of background, I am a multirotor pilot, and am primarily interested in miniquads.That being said the testing I've done appl..
12.40€
Ex Tax:10.00€
Introduction:Carbon Fiber Flat Bar, Strips, made from Carbon Fiber and Resin Epoxy. Manufactured with Pultrusion method. Since these flat bars/strips ..
3.35€
Ex Tax:2.70€
3 mode servo checker for 1-3 servos or ESC. Features:Manual Mode - Check reaction times by varying dial position
Neutral Mode - ..
10.54€
Ex Tax:8.50€
Top Quality Carbon Fiber 3K+UD+3K Plate Glossy Finished High Strength,
Light weight,
Abrasion / Corrosion / Heat Resista..
49.60€
Ex Tax:40.00€
TATTU 1050mAh 14.8V Dischage Current 75/150C 4S1P Lipo BatteryLipolymer Battery Pack 1550mAh 14.8V (4s) 75C/150C 4S1P Suitable model :FPV Racing Quadc..
21.70€
Ex Tax:17.50€
New Product
Product Description: Premium 22AWG 60-Core High-Flex Servo Wire (3-cores)High-performance triple-pole wire designed for demanding RC applications. The..
1.24€
Ex Tax:1.00€
04099 Chassis Spareparts, Mikado helicopters, LOGO, 700, Metal hex bolts 59mm, M3..
4.90€
Ex Tax:3.95€
Sort Description:Long Life tool with high hardness, high wear resistance, high strength, resistance to bending, anti-impairment.
Flute Bits: Two flu..
3.72€
Ex Tax:3.00€
04076 Mikado helicopters Driven Belt 638 XL..
11.90€
Ex Tax:9.60€
Top Quality Carbon Fiber Tube 3K Roll Wrapped Twill, Matte FinishHigh Stength, Light weight, Abration / Corrosion / Heat Resistance, Low Thermal Expan..
39.68€
Ex Tax:32.00€
Tail Motor Reinforcement Plate set Orange colour for OMPhobby M2 EVO RC HelicopterColors:OSHM2318Y = YellowOSHM2318W = SilverOSHM2318O = OrangeOSHM231..
6.49€
Ex Tax:5.23€
05139 Chassis parts Mikado helicopters Canopy holders LOGO 600SX, LOGO 600SE (V3)..
9.65€
Ex Tax:7.78€