VBar NEO Accessories. Cases, Converion Kit, Antennas, Gyroscope VBar, Gyro Tape, Patchable VBar Receiver, Mini USB.
05064 VBar Accessories Antenna for VBar NEO, 250mm..
8.90€
Ex Tax:7.18€
Case for VBar NEO including 180 mm 2.4 GHz antenna wiresFor the 2nd hardware generation 04945/46 VBar NEO 6.1 Express (with antenna connectors on the main board) VBar NEOs of the 1st hardware generation can not be converted. For those devices, please use VBar Control RX Satellite 04882 and..
19.40€
Ex Tax:15.65€
04613 VBar NEO Accessories Gyro Tape for VBar 100x50x1,2mm..
3.90€
Ex Tax:3.15€
Case for VBar NEO
For the 2nd hardware generation
04945/46 VBar NEO 6.1 Express (with antenna connectors on the main board)
04949/50 VBar NEO 6.1 Express NEO VLink (with antenna wires plugged in directly to the single pc board)
05054 VBar NEO VBasicFor the 1st hardware generation c..
13.20€
Ex Tax:10.65€Showing 1 to 4 of 4 (1 Pages)
Scorpion HKII-2221-12[HK-2221-12]
Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both q..
79.36€
Ex Tax:64.00€
Input Voltage Range from 15~50V. Stabilizing Output Voltage 12V. Switching Voltage Module Guaranteed a Power at 3A Load Using HRD mod..
13.11€
Ex Tax:10.57€
New Product
Arduino Nano Terminal Adapter – Fully Assembled Screw ShieldSave time and avoid soldering mistakes. This terminal expansion board comes 100% pre-assem..
3.10€
Ex Tax:2.50€
Expandable Rod Cover Braided Protection Sleeve Yellow colorFeatures:Widely used in Wire, Cable, and Rod/Boom Cover, computer cable, computer periphera..
3.80€
Ex Tax:3.06€Case for VBar NEO
For the 2nd hardware generation
04945/46 VBar NEO 6.1 Express (with antenna connectors on the main board)
04949/50 VBar NEO ..
13.20€
Ex Tax:10.65€
Description:Heat Shrinkable Tubing. Cable Wire Heatshrink Tubing Wrap. We don't cut the wire if you will order above 1meter Features:General purp..
8.68€
Ex Tax:7.00€
This is the most popular mini servo. Only weighs 9 gram and gives you 2.5 kg-cm torque. Pretty strong regarding its size. Suitable for Rc small Airpla..
5.58€
Ex Tax:4.50€
01956 Mikado LOGO helicopters spareparts Socket head cap screw M3x16..
3.10€
Ex Tax:2.50€
01974 Mikado Helicopters Socket head cap screw (blade holder) M4What's in the Box:2 x Socket Cap Head Screws M4x32mm2 x Secure Nuts M4..
5.10€
Ex Tax:4.11€
Scorpion 55mm Cross Mount[CrossMount55]The entire Scorpion S-55mm motors series include a cross style back plate mount, but occasionally, you need a s..
6.20€
Ex Tax:5.00€
Product DescriptionScorpion lock strap has the revolutionary change for the traditional strap, with the newest design of non-slippery grip to assure m..
6.80€
Ex Tax:5.48€
Sort Discription:Watt Meter is a indispensible instrument for measuring and calculating the electrical parameters of your circuit and get the most out..
24.80€
Ex Tax:20.00€
05015 Mikado Helicopters Chassis Parts Upper sideframe right, LOGO 700, LOGO 800..
35.09€
Ex Tax:28.30€
Lipo Battery Pack 220mAh 1S1P. Max Burst Discharge: 45C, It suited to the following model:Micro rc-airplanesMicro r/c helicoptersSmall drones and so o..
3.90€
Ex Tax:3.15€
04725 Mikado Rotorhead spare parts Extra hard damper set LOGO 700, LOGO 800, 90 shore..
4.90€
Ex Tax:3.95€
Gemfan 7 x 3.5" Direct Drive Electric PropellerIntroduction:GemFan produces some of the finest props for RC use. One of these series are the Direct Dr..
1.55€
Ex Tax:1.25€
Features:Type: Deep groove ball bearingsMaterial: Chrome SteelSize: 0.8cm x 1.8cm x 0.5cmInner diameter=0.8cmOuter diameter=1.6cmWidth/ Height/ Thickn..
7.13€
Ex Tax:5.75€
Item no: TAA4502S75X3L - Article no: TA-75C-450-2S1P-L
These Tattu 450mAh 2S Lipo batteries provide high quality, reliable power for your multirot..
9.92€
Ex Tax:8.00€
Gemfan 45mm Mini ABS Propellers, High Efficiency, Perfect Balanced, Strong & Light Weight.What you Get:2 x Prop 45mm ABS CW (clockwise)2 x Prop 45..
2.17€
Ex Tax:1.75€
Micro Coreless Motor Ultra High Speed for RC Models, Ronbits, DIY projectsFeatures:Rated voltage 3.2V DC Direction of rotation CW and CCW Operatin..
8.68€
Ex Tax:7.00€
00915 Mikado LOGO helicopters Spareparts Blade Holder 14mm blade grip, Ø4mm blade screw ..
11.90€
Ex Tax:9.60€
04630 Mikado Helicopters LOGO 600 TaiRotor Parts Tail rotor hub, 5mm..
18.00€
Ex Tax:14.52€
Servo Tester CCPM with 3 ModesFeatures:The device also can be used as a signal generator for electric speed controller (ESC), then you can tes..
3.72€
Ex Tax:3.00€
04099 Chassis Spareparts, Mikado helicopters, LOGO, 700, Metal hex bolts 59mm, M3..
4.90€
Ex Tax:3.95€
Hot
CNC Aluminum 25mm Boom Clamps - Professional High-Stress SupportUpgrade from plastic to precision. These CNC-machined Aluminum Alloy boom clamps offer..
5.58€
Ex Tax:4.50€