Chargers for batteries, Lipo, LiHV, Lion, etc.
Sort Description:Simple, sleek and easy to use, who said a charger can't be stylish? The A400 has 40w of charging power and is suitable for 3s and 4s batteries making it ideal for Mini drone and Park scale flyers. The A400 has a wide input voltage range making it an ideal charger for people who tra..
19.84€
Ex Tax:16.00€Sort Description:An Ideal Lipo Bettery Charger Plug and Play fro small sizes Lipo-Pack. 20 Watt Charging Power. Built-In Power Supply 220VAC.Usage: Please first turn on the charger, then the three lights are red to green, the charger is working properly. and then connect the battery
to the b..
14.88€
Ex Tax:12.00€Lipo Charger for 2 and 3S Built-in 220 VACLipo Charger for 2S and 3S Lipo Batteries. It has internal Power Supply 2ASpecifications:Input voltage: 100-240AC. Batteries: Li-po: 2S~3S. Charge power: Max 18W. Charge current: 0.5A/1.0AWhat you Get:1 x Lipo Charge..
10.85€
Ex Tax:8.75€Electronic Charger 100 Watts 7Amps, for LiPo, LiFe, NiMh, NiCD and Pb batteriesTechnical data Input voltage: 100-240 V (AC); 11-18 V (DC)Charging power: max. 100 WDischarging power: max. 5 WCharging current: 0,1-7,0 ADischarging current: 0,1-1,0 ABalancing current: 300 mA/CellCell count: 1-15 Nicke..
59.52€
Ex Tax:48.00€Balance Charger B6 for 2~6S Lipo BatteryBalance Charger for 2S up to 6S Lipo Batteries.Specifications:Input voltage: 11-18VDC Output Charge Power: 80WDischarge Power: 10WMax Charging Current: 6ADischarge Current Range: 0.1~2.0ACharge current range:0.1-6.0A NiCd/NiMH battery cell count: 1 - 15cellsL..
27.28€
Ex Tax:22.00€The Imars D300 Charger is a versatile and intelligent charger that supports both charging and discharging. As a member of G-Tech Eco, Imars D300 Charger is designed specifically for the G-Tech smart battery, but is also compatible with non-smart batteries.When a G-Tech smart battery is con..
134.85€
Ex Tax:108.75€Introduction:Imars Dual Battery Charger supports 2 channel charging and discharging: DC port power supply supports maximum single port 300W charging, and AC power supply supports intelligent distribution of total power.The power rate is 200W (2 channels), the maximum charging current is 15A, the cha..
129.58€
Ex Tax:104.50€Instruction:
Connect the charger to the power supply. The IMARS III LOGO will display for about 2 seconds before entering Charger mode. The top-level menu is divided into 3 functions. By pressing +/- buttons, the user may select between charge mode, battery check mode, and system setting mode.
..
49.60€
Ex Tax:40.00€Tattu TA1000 Dual-Channel Smart Charger – a versatile and intelligent charging solution designed to cater to a variety of batteries. As a proud member of G-Tech Eco, this charger is specifically tailored for G-Tech smart batteries while remaining compatible with non-G-Tech batteries.
When connected..
293.88€
Ex Tax:237.00€Showing 1 to 9 of 9 (1 Pages)
Lipo Battery Pack 11.1V, 750mAh, 60C, for OMPhobby M2EVO, RC HelicoptersWhat you Get:1 x Lipo Battery Pack 11.1V, 750mAh, 60C..
19.84€
Ex Tax:16.00€Charging Adaptor for XT30 Plug with 4.0mm Banana Plugs and 40cm Silicone Wire 16AWGSpecifications: Plugs: One male XT60 and Two male 4.0mm Banana..
7.19€
Ex Tax:5.80€NEMesis Motor Arms Fit to CNCed NEMesis Chassis.Specifications:Material: 3K Carbon Fiber Sheet Plain Weave Glossy FinishedMotor to Motor Diagonial: 28..
19.22€
Ex Tax:15.50€DUAL FPV UBEC 5.0V 3A fr 12V 2A Working Voltage 2s~6s LipoOne more imagine high-tech electronic device for FPV devices.High efficiency, suit for Telem..
6.82€
Ex Tax:5.50€04821 Mikado Helicopters Chassis parts Tail boom clamps, LOGO 480..
22.90€
Ex Tax:18.47€Product no: GEA40004S30E5- Article no: BSR30C40004S
Gens ace Soaring 4000mAh 14.8V 4S 30C Lipo Battery is suited to 50E, 110E, Habu, Funjet, Multiro..
58.28€
Ex Tax:47.00€Carbon Fiber Joint Tube Connector with Carbon Fiber Plates and Tube Clamp for 25/30mm Round Tubes/Booms, is a high Quality Module for Professional Mul..
17.36€
Ex Tax:14.00€Nineeagle Extra 330L 4 channels Aerobatic Airplane ReadysetEXTRA 330L with 4-channel functionality with aileron, elevator, rudder and throttle control..
80.60€
Ex Tax:65.00€Brushless Motor 2822-1200KV for small RC planes, Drones, Robots. Recommended Model Airplane Weight 200 uo to 600 grams.Propellers Suggestions Direct D..
14.88€
Ex Tax:12.00€FlySky FS-iA10B 10ch Receiver works great with the FlySky FS-i6 Controller. With Dual antennas give the FS-iA10B excellent reception and interference ..
29.76€
Ex Tax:24.00€What you Get:1 x Adapter XT60 (Female plug) to T-Plug Female..
3.41€
Ex Tax:2.75€The UAVrc Board is a high Quality all in one Professional Multicopters Board for DIY Frames. Designed from scratch by uavRC team. Unique in the market..
60.00€
Ex Tax:48.39€KST HV Digital Servo combo 3x X20-2208 v2.0 -CCPM, 1x X20-1035 v2.0 -Tail
item: X20 v2.0 comboSpecifications: X20-2208 v2.0 -CCPMTorque: 18 kg-cm (6...
500.00€ 649.63€
Ex Tax:500.00€CNC Tee Joint Tube Connector steering Mount clamp for round Tubes.Introduction:Manufactured from high tensile Aluminium alloy CNC Processed. Tee conn..
12.40€
Ex Tax:10.00€Slyzone RC832 Receiver is nice and small in size for easy integration into your ground station, but big in quality and features.Introduction:RC832 Sky..
45.37€
Ex Tax:36.59€Introduction:Carbon Fiber Flat Bar, made from Carbon Fiber and Resin Epoxy. Manufactured from Pultrusion. Since these flat bars/strips are made of 100..
4.34€
Ex Tax:3.50€GemFan ABS Plastic Propellers (normal and reverse) rotation for MultiRotors Projects.The Propeller Hub in back side, design to accept Adaptor Ring (in..
5.95€
Ex Tax:4.80€Product Description:High quality, fast (4-minute drying time), moisture resistant (EN 204 D2) white wood adhesive for internal use. Dries transparent...
5.58€
Ex Tax:4.50€Flight Control Mounting Plate set for OMPhobby M2 EVO RC HelicopterWhat you Get:1 x Flight Control Mounting Plate4 x Screw M1.7x4mm 2 x Screw M1...
4.99€
Ex Tax:4.02€Gemfan 6 x 3" Direct Drive Electric PropellerIntroduction:GemFan produces some of the finest props for RC use. One of these series are the Direct Driv..
1.43€
Ex Tax:1.15€Full Metal M6 Threaded Nozzle 0.3mm for 1.75mm filamnet for V5/V6 compatible Ultimaker.Features:Smooth Inner wallInterface Fit closely (solve the prob..
2.90€
Ex Tax:2.34€Product Description:High quality, water resistant (EN 204 D3) white wood glue for indoor and outdoor use. Dries transparent. moisture resistant (EN 20..
5.58€
Ex Tax:4.50€Gemfan EP 14 x 7" EP APC Style Propeller with Adaptor Rings
Introduction:GemFan produces some of the finest props for RC use. One of these series are..
7.44€
Ex Tax:6.00€04080 Mikado Tailboom parts Horizontal stabilizer, carbon LOGO 550, LOGO 600..
19.90€
Ex Tax:16.05€