Parts

S150A 1600V 3-Phase Bridge Rectifier Module Applications: Widely use for DC Current Equipment, Soft Start Capacitor, PWM Inverter Rectifier, Inverter Welding Machine, Current Charging Power Supply, etc.Specifications: ● Model: MDS150A-1600V ● Type: 3-Phase Bridge Rectifier Module ● Size: 80x4..

MDS200A 1600V 3-Phase Bridge Rectifier Module Applications: Widely use for DC Current Equipment, Soft Start Capacitor, PWM Inverter Rectifier, Inverter Welding Machine, Current Charging Power Supply, etc.Specifications: ● Model: MDS200A-1600V ● Type: 3-Phase Bridge Rectifier Module ● Size: 93..

Gryphon GEB-1012 External Buzzer 12mmOption accessory for the Gryphon Auto Booster plugs into the AUX port for additional very loud buzzing when Auto Booster is activated.Useful as a locator tool. If you lose your model, turn on the Auto Booster with this loud buzzer and it will be easy to find!What..

Gryphon Glow plug wire Alligator Clip..

Gryphon Glow plug wire Spring Clip..

This is the slide-type switch used in a regulator (GVR7020) The slide switch is a fail-safe-on type switch. If the switch is destroyed, the unit will remain ON. Only when the sliding switch is moved to the OFF position will the unit turn OFF. Bight Blue LED activates when the switch ..

GWS Power Divider 1.Be sure to observe the correct polarity when connecting receiver and servos to the PD-2.2.Be aware of voltage drop when using long servo extension wires.Note:1.Connect the PD-2 with either 4.8V or 6.0V battery pack. Do not plug both battery packs on it.2.Turn ON the switch if th..

Specifications:Pitch 2.54mmGender of Connector: MaleNumber of Pins: 40PinType of Row: Single-RowType of connector: Straight What you Get:1 x 40Pin 2.54mm Single Row Straight Male Pin Header Strip..

Nickel Strip quality low resistance 99.96% pure nickel Strip Sheets for battery spot welding machine, etc.. Features: Good welding performance, High tensile tension, Low resistivityUsage:Mainly used for nickel-metal hydride batteries, lithium batteries, pole ear, power tools, combined batteri..

Function introduction: This circuit with 12V battery will become a storage spot welding machine for lithium battery, nickel-chromium battery and other nickel sheet welding, according to different configurations can be welded thickness of 0.1MM-0.15mm.Button function: The button can switch mod..