JR style Servo Gold Plated Plugs with Pins Female set, Black color
Now you can build your own extensions with our male / female sets. Complete with gold plated contacts, they can either be crimped or soldered (recommended).
This connector is also compatible with female Futaba J connectors
Assemble the connectors, push the crimped male pins into the female housing until you hear them lock into place (the prongs will protrude out of the connector sockets), and then slide that assembly into the shroud. If you look inside the shroud, you will see a raised bump closer to one of the two openings; this is the opening into which you should plug the connector sub-assembly, and you should plug the assembly in so that the side of the female housing with the crimp pin latches faces the side of the shroud with the bump. If you have done things right, you will hear a snap when you push the female housing into the shroud, and it will lock in place
What you Get: 1 x set JR style connector Female
Note: These connectors are commonly referred to as “male” in the RC hobby industry, so please look carefully at the pictures of male JR connectors to make sure they are what you want.